Standing Seam Roof Panel Rake Support

Rake Support - Low

Part #	SSR System	Size	Gauge	Length	Finish
HW-7710	UD & DL	3 3/8″ x 2 1/2″	14	20′-0″	Red Oxide
HW-7710	UD & DL	3 3/8″ x 2 1/2″	14	20′-0″	Galvanized
HW-7712	BL & SLK	2 3/8″ x 3 1/2″	14	20′-0″	Red Oxide
HW-7712	BL & SLK	2 3/8″ x 3 1/2″	14	20′-0″	Galvanized

Note:
Use with Low Clips

Part #	SSR System	Size	Gauge	Length	Finish
HW-7720	UD & DL	4 3/8″ x 1 1/2″	14	20′-0″	Red Oxide
HW-7720	UD & DL	4 3/8″ x 1 1/2″	14	20′-0″	Galvanized
HW-7722	BL & SLK	3″ x 2 7/8″	14	20′-0″	Red Oxide
HW-7722	BL & SLK	3″ x 2 7/8″	14	20′-0″	Galvanized

Note:
Use with High Clips

Part #	SSR System	Size	Gauge	Length	Finish
HW-7722	UD	3″ x 2 7/8″	14	20′-0″	Red Oxide
HW-7722	UD	3″ x 2 7/8″	14	20′-0″	Galvanized
HW-7732	BL & SLK	2″ x 3 7/8″	14	20′-0″	Red Oxide
HW-7732	BL & SLK	2″ x 3 7/8″	14	20′-0″	Galvanized

Note:
Use with Utility Clips

Part #	SSR System	Size	Gauge	Length	Finish
HW-7664	DL	5″ x 2 15/16″	14	20′-0″	Red Oxide

Note:
Use with Double-Lok® roof system only
Use with 2″ Sliding Hi-Thermal Clips

Part #	SSR System	Gauge	Length	Finish	Weight Each
HW-4657	DL	14	10′-6″	Red Oxide	15.34#
HW-4657	DL	12	10′-6″	Red Oxide	15.34#

Note:
Used at edge zones when tighter clip spacing is required

Part #	SSR System	Gauge	Length	Finish	Weight Each
HW-4658	DL	16	8′-0″	Galvanized	13.06#
HW-4658	DL	14	8′-0″	Galvanized	15.62#
HW-4658	DL	12	8′-0″	Galvanized	23.32#

Note:
Used at the eave when installing Ultra-Dek® or Double-Lok® over existing R panel roof
Specify existing roof slope